Replacing out the factory stereo with the new aftermarket radio on the Ford Explorer is likely one of the simpler tasks for the do-it-yourselfer. With the proper tools, it takes lower than an hour. Ford Explorers used a pin device to loosen the radio from the sprint however you may make your personal with a coat hanger.
Ford Explorer Aftermarket Radio Installation Instructions
1. Open the hood and remove the negative battery cable. make sure it’s resting away from any metallic elements.
2. Cut two 8-inch items of coat hanger and bend them right into a U-shape. Alter the hangers till they match simply into the 2 front mounting holes on all sides of the stereo. Press the hangers into the holes. Squeeze every of the “U” items collectively and pull. The radio will pull out of the sprint. Later model of Ford Explorers need to remove the trim ring to reveal the mounting pinholes.
3. Pull the stereo head unit out of the sprint and remove the wires. Different Ford Explorer systems will swap out and plug straight into the unique wiring.
4. Join the brand new head unit wiring harness adapter to the unique wiring for an aftermarket set up. Snap the wire harness into the again of the brand new head unit and reattach the battery negative cable.
5. Flip the brand new Explorer aftermarket radio on and confirm every of the audio system is working and radio management is feasible. Slide the brand new head unit into the sprint till you hear the mounting pins click on into place.
